PPWR: how the new European regulations transform the future of labeling
A new era for labels and packaging in Europe
The packaging sector is undergoing one of the most significant regulatory transformations of recent years.
The new European Regulation on Packaging and Packaging Waste, known as PPWR —Regulation on Packaging and Packaging Waste—, It establishes a new common framework to move towards a more circular, efficient and sustainable packaging model across the European Union.
Regulation (EU) 2025/40 is applicable from August 12, 2026 and establishes different requirements that will be progressively implemented over the next few years. Among them are design for recycling, the reduction of materials, the use of recycled content in certain applications, and greater harmonization of the information displayed on packaging.
For the label sector, this change is particularly relevant.
The label is not merely a graphic element intended to identify a product or communicate a brand.
It forms part of the overall packaging design.
Therefore, issues such as the material of the label, the adhesive, the inks, the finishes or their compatibility with the packaging They are becoming increasingly important.
At ADCO We see this transformation as an opportunity to evolve towards labeling solutions that combine image, functionality, industrial efficiency, and sustainability.
How does the PPWR affect labeling?
1. Designing with recycling in mind
One of the fundamental principles of the PPWR is the Design for recycling.
This means that, progressively, the different elements that make up a packaging must be analyzed taking into account its behavior when the product reaches the end of its useful life.
And the label is part of this equation.
When developing a labeling solution, it will become increasingly important to analyze jointly:
- The material of the packaging.
- The front material of the label.
- The adhesive used.
- The inks.
- The barnices.
- The finishes.
- The surface covered by the label.
- The application system.
- The process of separating and recycling the packaging.
The PPWR establishes that the packaging marketed must be recyclable and provides design criteria for recycling and different levels of performance that will begin to be applied progressively starting in 2030.
This reinforces a fundamental idea: Packaging and labeling must be developed further as a joint solution..
2. Compatibility between the label and the packaging will be crucial
A label can have excellent visual and technical performance during the product's lifetime, but we must also analyze how it interacts with the packaging on which it is applied.
For example, the front material and the adhesive can influence the subsequent processes of sorting and recycling.
Therefore, there is no single appropriate label for all products.
A PET bottle.
A PE or PP container.
A glass container.
A cardboard packaging.
Each support has different characteristics and needs.
Selecting the materials correctly from the initial phase of the project will allow for the development of solutions that are better adapted to both the product and the new circularity criteria.
The label is part of the packaging system.
The new regulatory context calls for abandoning the practice of analyzing each component in isolation.
A packaging is a system in which different elements are involved:
packaging + closure + label + adhesive + inks + finishes.
They all serve a function.
And everyone can influence the final behavior of the team.
A label must continue to guarantee:
- Correct adhesion.
- Resilience.
- Readability.
- Print quality.
- Security.
- Identification.
- Brand differentiation.
- Good performance in the labeling line.
But at the same time, the selection of materials must increasingly take into account the environmental and regulatory requirements of packaging.
At ADCO, we work on each project from this perspective, analyzing the product, the packaging, the sector and the production process before defining the labeling solution.
Eco Tags: moving towards more responsible solutions
Sustainability does not depend solely on using a material that can be defined as ecological.
It requires analyzing the entire cycle of the solution.
At ADCO we work with Eco Labels, Developing alternatives based on recyclable, biodegradable and compostable materials for those projects where they are technically suitable.
But each application requires a specific analysis.
A sustainable solution must be able to maintain the performance required by the product and function properly throughout its entire life cycle.
That is why it is necessary to evaluate aspects such as:
- Type of material.
- Origin of the raw materials.
- Quantity of material used.
- Compatibility with the packaging.
- Type of adhesive.
- Printing process.
- Functionality.
- Durability.
- Storage conditions.
- Management at the end of its useful life.
The goal is not simply to replace one material with another.
It consists of finding the most suitable solution for each application.
Less material, greater efficiency
Another of the PPWR's major objectives is to reduce the unnecessary use of materials and minimize the generation of packaging waste.
In the field of labeling, this opens up new possibilities for optimization.
Depending on the project, the use of materials with lower grammages or thicknesses can be studied, dimensions can be optimized, or structures can be selected that allow reducing the consumption of raw materials.
But reducing does not mean compromising on the benefits.
A label must continue to withstand the real conditions to which it will be subjected:
Humidity.
Temperature.
Friction.
Refrigeration.
Chemical products.
Transport.
Manipulation.
Exhibition at the point of sale.
The goal is to find the right balance between reduction of material, efficiency and functionality.
New information requirements on packaging
The PPWR will also progressively transform the information that consumers will find on the packaging.
European regulation is moving towards a harmonized system that facilitates the identification of materials and helps consumers properly separate waste.
The regulations stipulate that the packaging must include a label that conforms to harmonized standards and provides information about its material composition starting from the August 12, 2028, or 24 months after the entry into force of the corresponding implementing acts, if that date is later. There are certain exceptions and particularities, including those related to certain pharmaceutical and healthcare products.
For the label sector, this means that it will be necessary to combine in an efficient way:
Mandatory information + brand identity + legibility + design + functionality.
The label will play an even more important role as an information support.
The label as a communication tool
Complying with new regulatory requirements does not mean giving up on design.
The exact opposite.
As the amount of information that must be included on a package increases, it will become even more important to properly organize the contents and efficiently utilize the available space.
Good labeling should allow the consumer to quickly identify:
- The brand.
- The product.
- Its characteristics.
- Mandatory information.
- The commercial messages.
- And, progressively, information related to materials and waste management.
The challenge will be to integrate all these elements while maintaining clear and attractive communication.
Different solutions for different needs
At ADCO, we specialize in the development and manufacture of labeling solutions for products and sectors with very different needs.
Self-adhesive labels
The self-adhesive labels They offer enormous versatility and adaptability.
They can be developed using different materials, adhesives and finishes depending on the product, the packaging and the conditions of use.
In the new regulatory context, the correct selection of the front material and adhesive will be especially important in order to achieve solutions compatible with the packaging needs.
Adhesive labels
The self-adhesive labels They are an especially efficient solution for large productions.
They allow for high-speed operation, cost optimization, and maintaining excellent graphical performance.
Its development must also take into account the relationship between the material of the label, the adhesive used during its application, and the material of the container.
Eco Labels
The Eco Labels They allow exploring alternatives aimed at labeling with less environmental impact.
Recyclable, biodegradable, compostable materials or those developed from new raw materials offer different possibilities.
The choice will always depend on the characteristics of the product and the packaging.
Promotional labels
The promotional labels They allow the use of the packaging itself as an active marketing tool.
Promotions.
Special campaigns.
Numerations.
Codes.
Variable information.
Releases.
Actions at the point of sale.
The evolution towards more regulated and traceable packaging does not eliminate these possibilities, but makes it even more important to properly combine creativity, information, and technology.
Different sectors, different needs
There is no universal labeling solution.
Each sector has its own requirements.
Food and beverages
Labels intended for food and beverages may be subjected to moisture, refrigeration, temperature changes, condensation, or intensive handling.
The choice of material and adhesive is fundamental to ensuring its performance.
Cosmetics and personal care
In cosmetics, the label is an essential part of product perception.
Special materials, embossing, reliefs and finishes allow for conveying quality and differentiation, but they must also be analyzed taking into account their interaction with the packaging.
Industry and chemicals
Industrial products may require labels that are capable of withstanding particularly demanding conditions.
Chemical products.
Oils.
Humidity.
Extreme temperatures.
Outdoor exhibition.
In these cases, sustainability and recyclability must always be combined with safety, legibility and durability.
Pharmacy and parapharmacy
The pharmaceutical sector requires a high level of precision, traceability and control.
The PPWR provides for specific requirements for certain packaging of medicines and medical products when other labeling requirements leave limited space or when additional labeling may affect the safety of use.
Therefore, each application must be analyzed according to its specific regulatory context.
Technology at the service of every label
The transition to more efficient labeling solutions requires combining new materials with technologies capable of properly transforming them.
At ADCO we have different systems and production capabilities to adapt each project to your needs.
We work with:
- Rotary flexographic printing up to 8 colors.
- Digital printing.
- Screen printing.
- Embossing.
- Relief.
- Different materials and finishes.
- Encoding and numbering systems.
- Quality control through artificial vision.
This technological combination allows us to work with both small productions and large volumes, and to adapt the solution to the specific needs of each project.
From design to the final label
The context of the PPWR reinforces the need to make correct decisions from the very early stages of the project.
At ADCO, we always start from a specific need.
We analyzed:
The product.
The packaging.
The sector.
The conditions of use.
The application system.
The graphic needs.
The materials.
The finishes.
And the sustainability goals.
From here, our sales and technical team works alongside the customer to develop the most suitable solution.
Because a label should not be evaluated solely by how it looks.
Also because of how it works.
From the label manufacturer to the technical partner
Regulatory evolution will make developing a label an increasingly technical process.
Brands must make decisions related to:
- Materials.
- Adhesives.
- Compatibility.
- Recyclability.
- Reduction of material.
- Environmental information.
- Traceability.
- Industrial application.
- Brand image.
That is why the role of the label manufacturer is also evolving.
It’s no longer just about receiving a design and printing it.
It is about accompanying the client in the search for a solution that works properly from all perspectives.
At ADCO not only manufactures labels. We also develop customized solutions.
Ready for the labeling of the future
The PPWR opens a new era for the entire European packaging industry.
In the coming years, decisions related to materials, adhesives, recyclability, design, and information will have an increasingly important role.
The labels must continue to identify.
Communicating.
Protecting the brand.
Distinguishing the product.
And functioning correctly in the production lines.
But, in addition, they must integrate more and more into a packaging model based on circularity and the efficient use of resources.
At ADCO We are facing this evolution by combining experience, technology, innovation and specialized knowledge in labeling.
Because the future of the label does not consist solely in printing better.
It consists of design solutions capable of responding to the new needs of the product, the market, and the planet.